1. 2. 3. material content data sheet sales product name ipb039n10n3 g issued 26. september 2014 ma# MA001263090 package pg-to263-7-3 weight* 1526.77 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 8.861 0.58 0.58 5804 5804 leadframe non noble metal iron 7439-89-6 0.803 0.05 526 inorganic material phosphorus 7723-14-0 0.241 0.02 158 non noble metal copper 7440-50-8 801.714 52.50 52.57 525103 525787 wire non noble metal aluminium 7429-90-5 11.518 0.75 0.75 7544 7544 encapsulation organic material carbon black 1333-86-4 8.679 0.57 5685 plastics epoxy resin - 95.471 6.25 62531 inorganic material silicondioxide 60676-86-0 474.463 31.08 37.90 310761 378977 leadfinish non noble metal tin 7440-31-5 12.317 0.81 0.81 8067 8067 plating non noble metal nickel 7440-02-0 0.269 0.02 176 inorganic material phosphorus 7723-14-0 0.001 0.00 0.02 525102 176 solder noble metal silver 7440-22-4 0.152 0.01 100 non noble metal tin 7440-31-5 0.122 0.01 80 non noble metal lead 7439-92-1 5.815 0.38 0.40 3809 3989 heatspreader non noble metal iron 7439-89-6 0.106 0.01 70 inorganic material phosphorus 7723-14-0 0.032 0.00 21 non noble metal copper 7440-50-8 106.210 6.96 6.97 69565 69656 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|
